Are you a beginner and always on the go? Then the GTX Go 40 pod from Vaporesso is perfect for you. Why? For its compact and light design that can be easily slipped into a pocket, but also for its simplicity of use . There...
GTX coils - Vaporesso | Pack x5
GTX coils - Vaporesso | Pack x5
| 0.2 ohm Mesh - V2 | |
| 0.3 ohm Mesh - V2 | |
| 0.6 ohm Mesh - V2 | |
| 0.8 ohm Mesh - V2 | |
| 0.4 ohm Mesh - V2 | |
| GTX 0.15 ohm Mesh - V2 | |
| 0.15 ohm Dual Mesh | |
| 0.2 ohm Dual Mesh | |
| 0.3 ohm Dual Mesh | |
| GTX 1.2 ohm Mesh - V2 |
- Type of inhalation
- MTL, DTL, RDL
- Packaging
- Pack with 5 units
- Country of manufacture
- made in China
- Labels
- New versions
Vaporesso GTX coils
Buy a pack of 5 replacement coils GTX of the brand Vaporesso.
With which material to use the coils GTX of Vaporesso ?
The GTX Vaporesso coils are compatible with the pod Target PM80, the cartridge Target PM80, the kit GTX One (except coils of 0.2 ohm and 0.3 ohm)kit, the clearomizer GTX 18 (except coils of 0.2 ohm and 0.3 ohm)kit (with GTX 22 clearomizer), the GTX 22 clearomizer, the pod Luxe PM40 (except 0.2 ohm and 0.3 ohm coils)pod, the PM40 Luxe cartridge (except 0.2 ohm and 0.3 ohm coils) pod Swag PX80, the Swag PX80 cartridge, the GTX Go 40 kit, the GTX Go 80 kit, theGTX Go 22 cartridge, the GTX Go 26 cartridge.
The different models of coils GTX Vaporesso
- Coil GTX 0.2 ohm (mesh): air draft DL (abundant steam and fast heating) - to use between 45 and 60W - ratio 50PG/50VG or 30PG/70VG - compatible with low nicotine levels (from 0 to 6 mg / ml)
- Coil GTX 0.3 ohm (mesh): air draft DL - to use between 32 and 45W - ratio 50PG/50VG or 30PG/70VG - compatible low nicotine levels (from 0 to 6 mg / ml)
- Coil GTX 0.6 ohm (mesh): air draft RDL (balance between flavors and steam) - to use between 20 and 30W - ratio 50PG/50VG or 30PG/70VG or 40PG/60VG - compatible nicotine rate of 0 to 9 mg / ml
- Coil GTX 0.8 ohm (mesh): RDL draw - to be used between 12 and 20W - ratio 50PG/50VG - compatible nicotine rate from 0 to 18 mg/ml
- Coil GTX 1.2 ohm (regular): MTL tight draw (max flavors) - to be used between 8 and 12W - ratio 50PG/50VG or 70PG/30PG or 60PG/40VG - compatible with nicotine salts, CBD and high nicotine levels (from 0 to 18 mg/ml)
- Coil GTX 1.2 ohm (mesh): MTL tight draw (max flavors) - to be used between 7 and 11W - ratio 50PG/50VG to 80PG/20VG - compatible with nicotine salts, CBD and high nicotine levels (from 0 to 18 mg/ml)
How to change the coil of the pod (Target PM80, Luxe PM40, Swag PX80, GTX Go 40 and GTX Go 80)?
Start by removing the cartridge from the pod and then the damaged coil. Prime a new coil and insert it before filling the tank, repositioning the cartridge and waiting a few minutes to vape.
How to change the resistance of the clearomizer (GTX 18 and GTX 22)?
Unscrew the clearomizer from the battery and then the base. Pull on the damaged coil. Then, prime a new coil and push it into the slot. Finally, replace the clearo, fill the tank and wait 10 minutes before vaping.
Complementary products
You have the GTX Go 80 pod from Vaporesso? Then why not buy the replacement cartridge GTX 26 of the same brand? This will make it easier for you to change your e-liquid , in a flash without having to worry about emptying...
Products of the same brand
Vaporesso makes a comeback with a box that combines endurance, performance while knowing how to absorb shock without blinking. The Armour Max box is designed to withstand the trials of everyday life as well as your wildest...
Compared to the Armour X, the Armour S box from Vaporesso offers increased compactness without sacrificing robustness. Thanks to its TPU coating , this mod will be a huge hit among black blocks, even after fifteen throws, it...
You have the GTX Go 80 pod from Vaporesso? Then why not buy the replacement cartridge GTX 26 of the same brand? This will make it easier for you to change your e-liquid , in a flash without having to worry about emptying...
